1-888-621-3237
Operations
No adjustments are required for most settings.Effective sensor default range is 12 cm. The factory setting should be satisfactory for most
installations.Place your hands under the faucet. The water will flow for 5 secs within the sensor’s range. When hands are removed water flow should stop.
Battery Replacement
Replace battery when RED LED indicator flashes rapidly or when flusher stops functioning.
Setting Sensor Range
Place and hold your hand in front of the sensor at the desired range for 5 seconds unitl the LED sensor starts to blink.Remove hand / object after 3 blinks.The range is now set.
Care & Cleaning
DO NOT USE abrasive or chemical cleaners (including chlorine bleach) to clean faucet that may dull the luster and attack the chrome or
special decorative finishes. Use ONLY mild soap and water, then wipe dry with clean cloth or towel. While cleaning the bathroom tile, protect
the faucet from any splattering of cleaner. Acids and cleaning fluids will discolor or remove chrome plating..
